Printing, copying and scanning
Display mode of page: All CC Library
There are 4 printers, 1 multifunction device, 1 large format inkjet printer and 1 cutting plotter:
Payments and pricing
CC payments: Payments are deducted from the separate printing account, that can be charged at Mrs. Dupalová or Samsonová, in the office L131 in the Computer Centre (CC). For printing, you must have a positive balance account. If the account is overdrawn during printing, the printing is finished, however then it is needed to cope incurred debt. CC payments are progressively transferred to HRDS payments, and in the future it is planned their abolition.
HRDS payments: Payments are deducted from an account held at Halls of Residence and Dining Services (HRDS), that can be charged in dining facilities and in service point. Current balance on the account and payments made during the last period can be checked on the HRDS page Board - card operations. For printing, you must have a positive balance account. If printing is more expensive than the balance on the account, the printing is finished, however then it is needed to charge the account and wait until re-payment is done and printing is unblocked.
Copying and scanning on the Xerox WorkCentre 7335 is completely independent on printing and its accounting. So it is possible to print on it at any time and it does not matter, whether there is someone working or not working (is logged in or is not).
After each printing using CC payment, report on the success or failed course is sent by e-mail to your school address. Report contains the number of pages being printed, the remaining amount on the account, and a description of the error, if it occured during printing. When HSRB payment is used, information about the operation performed, the unique identification, number of black and white pages A4, black and white pages A3, color pages A4, color pages A3, the amount paid and the state of the deduction.are sent by e-mail.
If one of the trays in available devices runs out of paper, tell it to operational service, to ensure its refill. Printing slides is possible only after consultation with the operational service with a surcharge of 10 Kč per slide. Using the custom paper is forbidden because of the different quality of available office and other paper and because of the need to modify printer settings for different types of paper to prevent deterioration of print quality, paper jams and unnecessary servicing.
Printing in Windows
To print, select the printer and send the job to it.
Example of using the printer ljlibc-bw/ljlibc-color
Selection of printer ljlibc-bw/ljlibc-color in library:
Changing printing properties:
Default printer settings for ljlibc-bw/ljlibc-color are one-sided black and white/color printing on A4 (for color printing, black and white pages remain black and white and as color are charged only those pages containing colored points):
The change for ljlibc-bw/ljlibc-color to double-sided printing using flip on long edge (2-Sided Print) or short edge (2-Sided Print, Flip on Short Edge):
The change for ljlibc-bw/ljlibc-color to A3 format:
The change for ljlibc-bw/ljlibc-color to print multiple pages per one sheet, in Document Options tab:
Example of using the printer ljstudc
Properties for all printers ljstud[cmno] are the same, so it is sufficient to show example for ljstudc in library:
Changing printing properties:
Default printer settings for ljstudc are one-sided black and white printing on A4:
The change for ljstudc to double-sided printing using flip on long edge (2-Sided Print) or short edge (2-Sided Print, Flip on Short Edge):
The change for ljstudc to print multiple pages per one sheet, in Document Options tab:
Printing in Unix
On Linux and on servers eva and merlin, you can use either GUI applications for printing, or it is possible to print from command line using commands lpr -P printer file or lp -d printer file. By default, printer ljstudn is set and for printing to this printer parameters -P or -d can be omitted.
Formats PostScript (*.ps), PCL and text are recognized. Files in PostScript or PCL are sent to the printer directly. A text file is converted to PostScript before it is sent to the printer. Lines may be terminated by the characters CR/LF or just LF character. Czech must be encoded in ISO8859-2. On one page there will be two subpages, each with 64 lines with 80 characters.
Examples of some useful commands
Copying and scanning
Attach the card to the card reader (A). After attaching the card, wait a while, especially when the device wakes up from sleep mode. Normal response time is 1-15 seconds.
If the touch screen (B) offers access to your account, confirm it by pressing the Yes button. Otherwise, press No and immediately inform the operational service.
On the main screen, select either the Copy to copying or E-mail for scanning to e-mail.
Put the source for copying or scanning either the image down on the glass sensor (F), or the image up into the automatic feeder for individual sheets (E). The glass sensor can copy or scan almost anything, but two-sided originals have to be flipped manually. In contrast, it is possible to put only individual and intact sheets A4 or A3 (without staples!) into the automatic feeder, but the feeder can handle more sheets at once, including two-sided originals.
For copying, check the settings and press the trigger button (D).
For scanning to e-mail, check the settings and press the trigger button (D). If you want to scan several pages into one document using glass sensor, you have to press in time the Next Original button during scanning of the first page. To end the scanning, then press the Last Original button.
The maximum allowable size of one e-mail is 10 MB. The scanning process stops when the size is exceeded, and you have to start again. Therefore, it is better to divide scans into parts with approximately 10 pages, which with pre-set parameters in one e-mail usually fit.
Another possibility is to select the Scan to PC on the main screen and to fill in the displayed login fields for storing data output via the protocol Samba. This way, there is no longer any output size limit.
After the work do not forget to logout yourself by pressing the button labeled with Odhlášení/Logout and a key symbol (C)! To complete logout, press the Logout button on the touch screen.
Back to Important Information and Guides